REDLINE / CATALOG
Radio receivers, transmitter modules, video transmitters and telemetry. Compare protocols, frequencies, interfaces and power requirements.
Products found: 33 / 33
Frequency band: 5.8 GHz, 40 channels. RCA video output; PAL and NTSC formats. Antenna connector: RP-SMA male. Ground module supply: 10.5–12.6 V; consumption: 800 mA at 12 V. Airborne module supply: 7–16.8 V; consumption: 200 mA at 12 V.
ExpressLRS receiver with two independent RF circuits and two antennas. Supports True Diversity and Gemini. CRSF interface and Wi-Fi configuration. Supply voltage: 4.5–12 V.
Dual-band ExpressLRS receiver with two LR1121 modules and four antennas. Operates in the 900 MHz and 2.4 GHz bands with Gemini Xrossband support. CRSF interface. Supply voltage: 4.5–8.4 V.
Compact ExpressLRS receiver based on the LR1121 radio chip. External antenna, CRSF interface and Wi-Fi configuration. Supply voltage: 5 V. Board dimensions: 20 × 13 × 3 mm.
Dual-band ExpressLRS receiver with two independent LR1121 RF circuits and two antennas. Supports Gemini Xrossband in the 900 MHz and 2.4 GHz bands. CRSF interface. Supply voltage: 4.5–8.4 V.
Miniature ExpressLRS receiver with an external T-shaped antenna. Transmits control commands and telemetry via CRSF. Supports updates over Wi-Fi. Supply voltage: 5 V.
Compact ExpressLRS receiver with two antennas and automatic antenna switching. CRSF interface for control and telemetry. Updates over Wi-Fi. Supply voltage: 5 V.
ExpressLRS receiver with two antennas for the 915 MHz band. Supports two-way telemetry and CRSF connectivity. Supply voltage: 4.5–8.4 V. Board dimensions: 24 × 14.2 mm.
External ExpressLRS module for radio transmitters with a Micro module bay. Operates in the 868/915 MHz bands and features an OLED display and cooling system. Maximum transmission power: 1 W.
ExpressLRS receiver with two independent RF circuits and two antenna connectors. A temperature-compensated TCXO oscillator stabilizes the operating frequency. Supports True Diversity and CRSF.
Dual-antenna ExpressLRS receiver for the 868/915 MHz bands. Two independent RF circuits provide True Diversity reception. Features a temperature-compensated TCXO oscillator and CRSF interface.
ExpressLRS receiver with two independent RF circuits and True Diversity support. A temperature-compensated TCXO oscillator improves frequency stability. CRSF interface; telemetry power up to 100 mW.
ExpressLRS receiver with two antenna connectors and antenna switching. CRSF interface for control commands and telemetry. Supports Wi-Fi updates. Supply voltage: 4–9 V. Dimensions: 21 × 15 mm.
5.8 GHz analog FPV video transmitter with 48 channels, power up to 1.6 W and PIT mode. Features an aluminum housing, integrated AGC microphone and SmartAudio control. Supply: 7–36 V. Dimensions: 37 × 24 × 6.7 mm.
Wideband analog video transmitter with 96 channels in the 4900–6060 MHz range. Selectable power levels: 25, 200, 500, 1000, 3000 and 5000 mW. A heat sink and fan provide cooling.
Wideband analog video transmitter with 96 channels in the 4900–6060 MHz range. Supports 25, 1000, 3000, 5000 and 8000 mW power levels. Equipped with a heat sink and cooling fan.
7.5 GHz analog FPV video transmitter with output power up to 5 W. Features a CNC-machined metal housing and a fan for active cooling.
Six-channel 2.4 GHz receiver with AFHDS 2A and PWM outputs. Supply: 4.0–6.5 V. Single antenna and RSSI support. Dimensions: 29 × 22 × 16.2 mm. Weight: 7.6 g.
2.4 GHz AFHDS 2A receiver with six PWM channels and two antennas. Supports PWM, PPM, i-BUS, S.BUS and RSSI. Supply: 4.0–8.4 V. Dimensions: 47 × 26.2 × 15 mm.
Ten-channel 2.4 GHz AFHDS 2A receiver with two antennas. Supports PWM, PPM and i-BUS. Dimensions: 47 × 33.1 × 14.7 mm. Weight: 19.3 g.
Compact 2.4 GHz AFHDS 2A receiver for radio-controlled models. Features PPM, i-BUS and S.BUS serial outputs for connection to a compatible flight controller.
Dual-band ExpressLRS receiver with two LR1121 chips, ESP32-PICO-D4 and TCXO. Supports 915 MHz Gemini, 2.4 GHz Gemini and simultaneous 915 MHz + 2.4 GHz operation. Supply: 5 V. Telemetry up to 100 mW, Wi-Fi updates. Receiver weight: 1.7 g.
Single-antenna ExpressLRS receiver based on ESP8285 for 915 or 868 MHz, depending on firmware. Runs on 5 V and connects to the flight controller via CRSF. IPEX1 antenna connector. Dimensions: 12 × 12 × 3 mm. Weight without antenna: 0.60 g.
6–7 GHz analog video transmitter with 64 channels. Supports SmartAudio and features an SMA antenna connector and cooling fan. Supply: 9–28 V. Output power up to 3 W.
Analog video transmitter with adjustable power up to 3 W. Supports SmartAudio control and features an SMA connector. Supply: 9–28 V. Board dimensions: 47 × 36 mm.
7–8 GHz analog video transmitter with power up to 3 W. Supports SmartAudio and features an SMA antenna connector. Supply: 14–28 V. Board dimensions: 47 × 36 mm.
8.0–8.8 GHz analog video transmitter with adjustable power up to 4 W. Supports SmartAudio and features an SMA connector. Supply: 16–28 V. Board dimensions: 47 × 36 mm.
Analog video receiver with 64 channels in the 6.1–7.2 GHz range. An OLED display shows the channel and signal strength. Supports automatic scanning and provides a CVBS video output. Supply: 5–36 V.
Compact ExpressLRS receiver for radio-controlled models. Operates at 2.4 GHz and features an external T-shaped antenna and connection pads for a flight controller.
Compact 915 MHz ExpressLRS receiver based on ESP8285 and SX1276. Connects to a flight controller via CRSF and runs on 3.6–5.5 V. IPEX antenna connector. Board dimensions: 11 × 18 mm.
Dual-band 900 MHz/2.4 GHz ExpressLRS receiver based on LR1121 and ESP32-PICO with a temperature-compensated TCXO oscillator. Supports Gemini and features two IPEX1 antenna connectors. Supply: 3.6–5.5 V. Dimensions: 16 × 27 mm. Weight without antennas: 1.8 g.
Compact 2.4 GHz ExpressLRS receiver. Supports CRSF and features an external T-shaped antenna and Wi-Fi updates. Designed for connection to compatible flight controllers.
Supply takes up to 45 days. The exact time is agreed individually for each item. Add the products to a request or contact us.
Discuss supply ↗
EN